Garnet Abrasive for Blasting Application

Sunnforest also offers the garnet abrasive media for blast cleaning application. In terms of Quality, Industrial Garnet is much better than slag. In addition, it has no health issues like the silica sand. Due to this, Garnet is now the preferred blasting media. As our Garnet is crushed from hard rock, it will be of higher density, sharper, and wider size ranges suitable for use in various blasting application.

Thanks to its high density and sharper edges, Sunnforest Garnet have very strong blasting performance with good surface profile, especially for the heavy coating & rusty removing ability.

High performance grades for the industry applications as follows :

- Ship building and repair
- Industrial painting contracting
- Petro-chemical
- Heavy equipment repair - Blast Rooms
- Powder coating

The standard grades of garnet abrasive media for blasting media are 12/24, 20/40, 30/60.

1) Grit No. 10/20, Garnet Mesh 10-20, Micron 2000 ~ 850 : Typical Application is used for water filtration Media

2) Grit No. 20/40, Garnet Mesh 20-40, Micron 850 ~ 425 : Typical Application is used for Sand Blasting Media

3) Grit No. 30/60, Garnet Mesh 30-60, Micron 600 ~ 250 : Typical Application is used for Sand Blasting Media

4) Grit No. 40/60, Garnet Mesh 40-60, Micron 425 ~ 250 : Typical Application is used for Water Jet Cutting Materials: Tile, Marble, Granite,Stone,Stainless Steel, Steel Plate, etc

5) Grit No: 60/90, Garnet Mesh 60-90, Micron 250 ~ 160 : Typical Application is used for Water Jet Cutting Abrasive Materials: Aluminum Alloy, and other precious metals

6) Grit No: 90/120, Garnet Mesh 90-120, Micron 160 ~ 125 : Typical Application is used for Precise Water Jet Cutting, Hole Drilling & Lapping

7) Grit No: 120/180, Garnet Mesh 120-180, Micron 125 ~ 80 : Typical Application is used for Precise Water Jet Cutting, Hole Drilling & Lapping

8) Grit No: 180/240, Garnet Mesh 180-240, Micron 80 ~ 63 : Typical Application is used for Hole Drilling & Lapping

9) Grit No: 24 , Garnet Mesh 20-25, Micron 850 ~ 710 : Typical Application is used for Sand Blasting Media, Lapping, making coated or bonded abrasive tools

10) Grit No: 30 , Garnet Mesh 25-30, Micron 710 ~ 600 : Typical Application is used for Sand Blasting Media, Lapping, making coated or bonded abrasive tools

11) Grit No: 36 , Garnet Mesh 30-35, Micron 600 ~ 500 : Typical Application is used for Sand Blasting Media, Lapping, making coated or bonded abrasive tools

12) Grit No: 40 , Garnet Mesh 35-40, Micron 500 ~ 425 : Typical Application is used for Sand Blasting Media, Lapping, making coated or bonded abrasive tools

13) Grit No: 46 , Garnet Mesh 40-45, Micron 425 ~ 355 : Typical Application is used for Sand Blasting Media, Lapping, making coated or bonded abrasive tools

14) Grit No: 54 , Garnet Mesh 45-50, Micron 355 ~ 300 : Typical Application is used for Sand Blasting Media, Lapping, making coated or bonded abrasive tools

15) Grit No: 60 , Garnet Mesh 50-60, Micron 300 ~ 250 : Typical Application is used for Water jet-cutting abrasive, Sand blasting media ,lapping ,coated or bonded abrasive tools

16) Grit No: 70 , Garnet Mesh 60-70, Micron 250 ~ 212 : Typical Application is used for Water jet-cutting abrasive, Sand blasting media ,lapping ,coated or bonded abrasive tools

17) Grit No: 80 , Garnet Mesh 70-80, Micron 212 ~ 180 : Typical Application is used for Water jet-cutting abrasive, Sand blasting media ,lapping ,coated or bonded abrasive tools

Garnet Abrasive for Blasting Application

Available Garnet Grit & Typical applications: